1
|
-- Logs begin at Thu 2019-02-14 10:11:58 UTC. --
|
2
|
Jun 16 11:14:25 driver systemd[1]: Started cu.
|
3
|
Jun 16 11:14:25 driver start_cu.sh[2107]: ethtool -G eth0 rx 4096
|
4
|
Jun 16 11:14:25 driver start_cu.sh[2107]: ethtool -G eth0 tx 4096
|
5
|
Jun 16 11:14:25 driver start_cu.sh[2107]: /yzmm/gnb/cu/bin/start_cu.sh: line 21: [: ==: unary operator expected
|
6
|
Jun 16 11:14:25 driver start_cu.sh[2107]: ifconfig eth0 mtu 1600
|
7
|
Jun 16 11:14:25 driver start_cu.sh[2107]: ifconfig eth0 txqueuelen 80000
|
8
|
Jun 16 11:14:25 driver start_cu.sh[2107]: ethtool -G eth2 rx 4096
|
9
|
Jun 16 11:14:25 driver start_cu.sh[2107]: ethtool -G eth2 tx 4096
|
10
|
Jun 16 11:14:25 driver start_cu.sh[2107]: /yzmm/gnb/cu/bin/start_cu.sh: line 21: [: ==: unary operator expected
|
11
|
Jun 16 11:14:25 driver start_cu.sh[2107]: ifconfig eth2 mtu 1600
|
12
|
Jun 16 11:14:25 driver start_cu.sh[2107]: ifconfig eth2 txqueuelen 80000
|
13
|
Jun 16 11:14:25 driver start_cu.sh[2107]: ifconfig lo txqueuelen 80000
|
14
|
Jun 16 11:14:25 driver start_cu.sh[2107]: sysctl: cannot stat /proc/sys/net/ipv6/conf/all/disable_ipv6: No such file or directory
|
15
|
Jun 16 11:14:25 driver start_cu.sh[2107]: net.core.netdev_max_backlog = 204800
|
16
|
Jun 16 11:14:25 driver start_cu.sh[2107]: net.core.optmem_max = 209715200
|
17
|
Jun 16 11:14:25 driver start_cu.sh[2107]: net.core.rmem_max = 209715200
|
18
|
Jun 16 11:14:25 driver start_cu.sh[2107]: net.core.wmem_max = 209715200
|
19
|
Jun 16 11:14:25 driver start_cu.sh[2107]: net.core.wmem_default = 209715200
|
20
|
Jun 16 11:14:25 driver start_cu.sh[2107]: net.core.rmem_default = 209715200
|
21
|
Jun 16 11:14:25 driver start_cu.sh[2107]: net.ipv4.udp_mem = 157286400 209715200 262144000
|
22
|
Jun 16 11:14:25 driver start_cu.sh[2107]: net.core.netdev_max_backlog = 65535
|
23
|
Jun 16 11:14:25 driver start_cu.sh[2107]: ********************************************************
|
24
|
Jun 16 11:14:25 driver start_cu.sh[2107]: System configuration done
|
25
|
Jun 16 11:14:25 driver start_cu.sh[2107]: ********************************************************
|
26
|
Jun 16 11:14:28 driver start_cu.sh[2107]: run_single_instance: end
|
27
|
Jun 16 11:14:28 driver start_cu.sh[2107]: ***************************************************************************
|
28
|
Jun 16 11:14:28 driver start_cu.sh[2107]: * CU VERSION
|
29
|
Jun 16 11:14:28 driver start_cu.sh[2107]: ***************************************************************************
|
30
|
Jun 16 11:14:28 driver start_cu.sh[2107]: * Version: YZS-NR-C-Rel_3.1.1_Pre1T1_4_2025-06-11T11:01:14
|
31
|
Jun 16 11:14:28 driver start_cu.sh[2107]: * Image Date: Jun 11 2025
|
32
|
Jun 16 11:14:28 driver start_cu.sh[2107]: * Image Time: 11:02:26
|
33
|
Jun 16 11:14:28 driver start_cu.sh[2107]: ***************************************************************************
|
34
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.235009][5][t: 547913093136][ERR:0] send_interval:%u file: app_cntrl.cpp, line: 1174
|
35
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [INF]: Scheduled changes not applied because of other existing connections.
|
36
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [INF]: Connection 14 created.
|
37
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [INF]: Session 524 (user "root", CID 14) created.
|
38
|
Jun 16 11:14:28 driver start_cu.sh[2107]: GET_SERVICE_DIRECT,dir:7
|
39
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Size 0: Offset = 0, Size start = 0x7f8a76d010, Size end = 0x7f8a864130
|
40
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Size 1: Offset = 1012000, Size start = 0x7f8a864130, Size end = 0x7f8b869a30
|
41
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Size 2: Offset = 17812000, Size start = 0x7f8b869a30, Size end = 0x7f8e87a530
|
42
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Size 3: Offset = 68212000, Size start = 0x7f8e87a530, Size end = 0x7f92212f80
|
43
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Size 0: Offset = 0, Size start = 0x7f79e5d010, Size end = 0x7f79f54130
|
44
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Size 1: Offset = 1012000, Size start = 0x7f79f54130, Size end = 0x7f7d94ddf0
|
45
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Size 2: Offset = 61804000, Size start = 0x7f7d94ddf0, Size end = 0x7f7d954240
|
46
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Size 3: Offset = 61829680, Size start = 0x7f7d954240, Size end = 0x7f8a199ac0
|
47
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Size 4: Offset = 271829680, Size start = 0x7f8a199ac0, Size end = 0x7f8a19c210
|
48
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Size 0: Offset = 0, Size start = 0x7f78e74010, Size end = 0x7f78e897d0
|
49
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Size 1: Offset = 88000, Size start = 0x7f78e897d0, Size end = 0x7f78f473d0
|
50
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Size 2: Offset = 865216, Size start = 0x7f78f473d0, Size end = 0x7f78f66ad0
|
51
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Size 3: Offset = 993984, Size start = 0x7f78f66ad0, Size end = 0x7f790610d0
|
52
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Size 4: Offset = 2019520, Size start = 0x7f790610d0, Size end = 0x7f7909f930
|
53
|
Jun 16 11:14:28 driver start_cu.sh[2107]: num_data_pools:3,file_name:../config/pool_config.txt,config_mapper size:3
|
54
|
Jun 16 11:14:28 driver start_cu.sh[2107]: num_sizes:1,pool_id:2044,,block_size:80,num_blocks:50000,,free_threshold:2000
|
55
|
Jun 16 11:14:28 driver start_cu.sh[2107]: num_sizes:1,pool_id:2045,,block_size:80,num_blocks:12000,,free_threshold:2000
|
56
|
Jun 16 11:14:28 driver start_cu.sh[2107]: num_sizes:1,pool_id:2046,,block_size:80,num_blocks:2000,,free_threshold:500
|
57
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.558225][5][t: 547913093136][GNB_MGR] cpu_info_processor::get_cpu_thread_num file: cpu_info_processor.cpp, line: 50
|
58
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.573291][5][t: 547913093136][GNB_MGR] lineBuff:%s,size:%u file: cpu_info_processor.cpp, line: 67
|
59
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.573622][5][t: 547913093136][APP] get_cpu_thread_num,thread_num:%d file: app_cntrl.cpp, line: 159
|
60
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [INF]: Scheduled changes not applied because of other existing connections.
|
61
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [INF]: Connection 15 created.
|
62
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [INF]: Session 525 (user "root", CID 15) created.
|
63
|
Jun 16 11:14:28 driver start_cu.sh[2107]: xzb app_int_end_ms: 410 ms
|
64
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Succeeded to open shm,id:7,oriKey:3
|
65
|
Jun 16 11:14:28 driver start_cu.sh[2107]: xzb thread_name: TIMER, _thread_id: 2171, thr_id: 547255071152
|
66
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Succeeded to open shm,id:8,oriKey:16
|
67
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.695773][5][t: 547913093136][PDCP_C_CTRL] file: pdcp_c_db.h, line: 661
|
68
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.696090][5][t: 547913093136][PDCP_RX_CTRL] file: pdcp_db.h, line: 3829
|
69
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.696313][5][t: 547913093136][SDAP_RX_C] file: sdap_db.h, line: 727
|
70
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.696513][5][t: 547913093136][EGTPU_COMMON] file: egtpu_db.h, line: 658
|
71
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.696727][5][t: 547913093136][EGTPU_COMMON] file: egtpu_db.h, line: 658
|
72
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.696913][5][t: 547913093136][BEARER_MGR] file: bearer_mgr_db.h, line: 1055
|
73
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.697132][5][t: 547913093136][UE_CONN_MGR] file: ue_conn_mgr_db.h, line: 2475
|
74
|
Jun 16 11:14:28 driver start_cu.sh[2107]: xzb app_modules_end_ms: 472 ms
|
75
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [INF]: Scheduled changes not applied because of other existing connections.
|
76
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [INF]: Connection 16 created.
|
77
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [INF]: Session 526 (user "root", CID 16) created.
|
78
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.764809][5][t: 547913093136][APP] INIT LOAD CONFIG INFO SUCCESS! file: app_main.cpp, line: 77
|
79
|
Jun 16 11:14:28 driver start_cu.sh[2107]: xzb config_end_ms: 540 ms
|
80
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.765643][5][t: 547913093136][APP] stat_log_threshold_timestamp:%llu file: config_cu_main.cpp, line: 85
|
81
|
Jun 16 11:14:28 driver start_cu.sh[2107]: xzb thread_name: COMMON_CNTRL, _thread_id: 2173, thr_id: 547244208560
|
82
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Succeeded to open shm,id:9,oriKey:14
|
83
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.766403][5][t: 547913093136][APP] file: app_cntrl.cpp, line: 421
|
84
|
Jun 16 11:14:28 driver start_cu.sh[2107]: xzb thread_name: SCTP_NG_CLIENT, _thread_id: 2174, thr_id: 547242107312
|
85
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Succeeded to open shm,id:10,oriKey:0
|
86
|
Jun 16 11:14:28 driver start_cu.sh[2107]: xzb thread_name: SCTP_XN_CLIENT, _thread_id: 2175, thr_id: 547240952240
|
87
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Succeeded to open shm,id:11,oriKey:1
|
88
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.767542][5][t: 547913093136][PDCP_C_CTRL] file: pdcp_c_cntrl.cpp, line: 67
|
89
|
Jun 16 11:14:28 driver start_cu.sh[2107]: xzb thread_name: UE_CNTRL0, _thread_id: 2176, thr_id: 547239797168
|
90
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Succeeded to open shm,id:12,oriKey:12
|
91
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.768184][5][t: 547913093136][APP] file: app_cntrl.cpp, line: 585
|
92
|
Jun 16 11:14:28 driver start_cu.sh[2107]: xzb thread_name: RM0, _thread_id: 2177, thr_id: 547217772976
|
93
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Succeeded to open shm,id:13,oriKey:11
|
94
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.768847][5][t: 547913093136][APP] file: app_cntrl.cpp, line: 601
|
95
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.769011][5][t: 547913093136][APP] get_service_direct dir:%u file: app_cntrl.cpp, line: 747
|
96
|
Jun 16 11:14:28 driver start_cu.sh[2107]: xzb thread_name: UDP_RX_DL, _thread_id: 2178, thr_id: 547215671728
|
97
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.769349][5][t: 547215671728][APP] do.it send_restore_udp_alarm, pos:%s file: alarm_mgr.cpp, line: 272
|
98
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Succeeded to open shm,id:14,oriKey:10
|
99
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.769901][5][t: 547913093136][APP] file: app_cntrl.cpp, line: 815
|
100
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.770465][5][t: 547913093136][APP] f1_shm_switch:%u file: config_cu_main.cpp, line: 41
|
101
|
Jun 16 11:14:28 driver start_cu.sh[2107]: f1_shm_switch:1
|
102
|
Jun 16 11:14:28 driver start_cu.sh[2107]: xzb thread_name: UDP_RX_UL, _thread_id: 2180, thr_id: 547212517808
|
103
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Succeeded to open shm,id:16,oriKey:9
|
104
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.771560][5][t: 547913093136][APP] file: app_cntrl.cpp, line: 912
|
105
|
Jun 16 11:14:28 driver start_cu.sh[2107]: xzb thread_name: SHM_RX_UL, _thread_id: 2181, thr_id: 547208319408
|
106
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Succeeded to open shm,id:17,oriKey:5
|
107
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.775437][5][t: 547913093136][EGTPU_COMMON] file: egtpu_db.h, line: 685
|
108
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.775642][5][t: 547913093136][SDAP_TX_C] file: sdap_cntrl.cpp, line: 61
|
109
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.775821][5][t: 547913093136][PDCP_TX_CTRL] file: pdcp_cntrl.cpp, line: 77
|
110
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.775974][5][t: 547913093136][EGTPU_COMMON] file: egtpu_db.h, line: 692
|
111
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [INF]: Scheduled changes not applied because of other existing connections.
|
112
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [INF]: Connection 17 created.
|
113
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [INF]: Session 527 (user "root", CID 17) created.
|
114
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [INF]: Scheduled changes not applied because of other existing connections.
|
115
|
Jun 16 11:14:28 driver start_cu.sh[2107]: ylTest udp_rx_ul_thread,dir:7
|
116
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [INF]: Connection 18 created.
|
117
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [INF]: Session 528 (user "root", CID 18) created.
|
118
|
Jun 16 11:14:28 driver start_cu.sh[2107]: ylTest,dir:7
|
119
|
Jun 16 11:14:28 driver start_cu.sh[2107]: xzb thread_name: DL0, _thread_id: 2182, thr_id: 547065610672
|
120
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Succeeded to open shm,id:85,oriKey:8
|
121
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.877558][5][t: 547913093136][APP] file: app_cntrl.cpp, line: 1001
|
122
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.877743][5][t: 547913093136][EGTPU_COMMON] file: egtpu_db.h, line: 678
|
123
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.877922][5][t: 547913093136][SDAP_RX_C] file: sdap_cntrl.cpp, line: 94
|
124
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.878072][5][t: 547913093136][PDCP_RX_CTRL] file: pdcp_cntrl.cpp, line: 123
|
125
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.878237][5][t: 547913093136][EGTPU_COMMON] file: egtpu_db.h, line: 699
|
126
|
Jun 16 11:14:28 driver start_cu.sh[2107]: xzb thread_name: UL0, _thread_id: 2183, thr_id: 547043586480
|
127
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Succeeded to open shm,id:86,oriKey:7
|
128
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.878960][5][t: 547913093136][APP] file: app_cntrl.cpp, line: 1062
|
129
|
Jun 16 11:14:28 driver start_cu.sh[2107]: xzb thread_name: SCTP_SERVER, _thread_id: 2184, thr_id: 547021562288
|
130
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Succeeded to open shm,id:87,oriKey:6
|
131
|
Jun 16 11:14:28 driver start_cu.sh[2107]: xzb sctp_server_end_ms: 654 ms
|
132
|
Jun 16 11:14:28 driver start_cu.sh[2107]: xzb thread_name: OAM_AGENT, _thread_id: 2185, thr_id: 547019461040
|
133
|
Jun 16 11:14:28 driver start_cu.sh[2107]: ---------------------------------------------------------
|
134
|
Jun 16 11:14:28 driver start_cu.sh[2107]: STARTING GNB CONFIGURATION
|
135
|
Jun 16 11:14:28 driver start_cu.sh[2107]: ---------------------------------------------------------
|
136
|
Jun 16 11:14:28 driver start_cu.sh[2107]: Succeeded to open shm,id:88,oriKey:4
|
137
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.880662][5][t: 547913093136][APP] file: app_cntrl.cpp, line: 512
|
138
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.881070][TRC][t: 547913093136][APP] Version: YZS-NR-C-Rel_3.1.1_Pre1T1_4_2025-06-11T11:01:14 file: version.cpp, line: 21
|
139
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.881397][TRC][t: 547913093136][APP] The process ID is %d file: version.cpp, line: 22
|
140
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [INF]: Scheduled changes not applied because of other existing connections.
|
141
|
Jun 16 11:14:28 driver start_cu.sh[2107]: SCTP F1AP Init: IP=192.168.62.241 PORT=38472
|
142
|
Jun 16 11:14:28 driver start_cu.sh[2107]: SCTP XNAP_CLIENT local: IP=192.168.62.241 PORT=38423
|
143
|
Jun 16 11:14:28 driver start_cu.sh[2107]: SCTP XNAP_CLIENT remote: IP=192.168.62.241 PORT=38422
|
144
|
Jun 16 11:14:28 driver start_cu.sh[2107]: SCTP XNAP_SERVER local: IP=192.168.62.241 PORT=38422
|
145
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [INF]: Connection 19 created.
|
146
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [INF]: Scheduled changes not applied because of other existing connections.
|
147
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [INF]: Session 529 (user "root", CID 19) created.
|
148
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.945225][TRC][t: 547913093136][APP] set_thread_infos_2_data_pool dir:%u file: app_cntrl.cpp, line: 1114
|
149
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.945612][TRC][t: 547913093136][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
150
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.945890][TRC][t: 547913093136][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
151
|
Jun 16 11:14:28 driver start_cu.sh[2107]: success t_id:547065610672,tName:DL0
|
152
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.946314][TRC][t: 547913093136][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
153
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.946576][TRC][t: 547913093136][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
154
|
Jun 16 11:14:28 driver start_cu.sh[2107]: success t_id:547208319408,tName:SHM_RX_UL
|
155
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.947028][TRC][t: 547913093136][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
156
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.947221][TRC][t: 547913093136][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
157
|
Jun 16 11:14:28 driver start_cu.sh[2107]: success t_id:547215671728,tName:UDP_RX_DL
|
158
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.947568][TRC][t: 547913093136][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
159
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.947744][TRC][t: 547913093136][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
160
|
Jun 16 11:14:28 driver start_cu.sh[2107]: success t_id:547212517808,tName:UDP_RX_UL
|
161
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.948028][TRC][t: 547913093136][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
162
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.948233][TRC][t: 547913093136][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
163
|
Jun 16 11:14:28 driver start_cu.sh[2107]: success t_id:547213570480,tName:UDP_TX_UL
|
164
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.948527][TRC][t: 547913093136][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
165
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.948706][TRC][t: 547913093136][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
166
|
Jun 16 11:14:28 driver start_cu.sh[2107]: success t_id:547239797168,tName:UE_CNTRL0
|
167
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.949008][TRC][t: 547913093136][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
168
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.949212][TRC][t: 547913093136][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
169
|
Jun 16 11:14:28 driver start_cu.sh[2107]: success t_id:547043586480,tName:UL0
|
170
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [16/06/2025 11:14:28.949604][TRC][t: 547913093136][APP] create_event_timer time:%u file: common_cntrl_thread.cpp, line: 682
|
171
|
Jun 16 11:14:28 driver start_cu.sh[2107]: create_event_timer,time:1000
|
172
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [INF]: Connection 20 created.
|
173
|
Jun 16 11:14:28 driver start_cu.sh[2107]: [INF]: Session 530 (user "root", CID 20) created.
|
174
|
Jun 16 11:14:29 driver start_cu.sh[2107]: ========== LISTENING FOR NOTIFICATIONS ==========
|
175
|
Jun 16 11:14:29 driver start_cu.sh[2107]: SCTP NGAP local: IP=192.168.62.241 PORT=38412
|
176
|
Jun 16 11:14:29 driver start_cu.sh[2107]: SCTP NGAP remote: IP=192.168.62.10 PORT=38412
|
177
|
Jun 16 11:14:29 driver start_cu.sh[2107]: xzb f1_end_ms: 920 ms
|
178
|
Jun 16 11:14:34 driver start_cu.sh[2107]: #############################################################################################################################
|
179
|
Jun 16 11:14:34 driver start_cu.sh[2107]: CU is UP: DU ID= 1
|
180
|
Jun 16 11:14:34 driver start_cu.sh[2107]: #############################################################################################################################
|