|
1
|
-- Logs begin at Thu 2019-02-14 10:11:58 UTC. --
|
|
2
|
Jun 16 11:26:57 driver systemd[1]: Started cu.
|
|
3
|
Jun 16 11:26:57 driver start_cu.sh[3601]: ethtool -G eth0 rx 4096
|
|
4
|
Jun 16 11:26:57 driver start_cu.sh[3601]: ethtool -G eth0 tx 4096
|
|
5
|
Jun 16 11:26:57 driver start_cu.sh[3601]: /yzmm/gnb/cu/bin/start_cu.sh: line 21: [: ==: unary operator expected
|
|
6
|
Jun 16 11:26:57 driver start_cu.sh[3601]: ifconfig eth0 mtu 1600
|
|
7
|
Jun 16 11:26:57 driver start_cu.sh[3601]: ifconfig eth0 txqueuelen 80000
|
|
8
|
Jun 16 11:26:57 driver start_cu.sh[3601]: ethtool -G eth2 rx 4096
|
|
9
|
Jun 16 11:26:57 driver start_cu.sh[3601]: ethtool -G eth2 tx 4096
|
|
10
|
Jun 16 11:26:57 driver start_cu.sh[3601]: /yzmm/gnb/cu/bin/start_cu.sh: line 21: [: ==: unary operator expected
|
|
11
|
Jun 16 11:26:57 driver start_cu.sh[3601]: ifconfig eth2 mtu 1600
|
|
12
|
Jun 16 11:26:57 driver start_cu.sh[3601]: ifconfig eth2 txqueuelen 80000
|
|
13
|
Jun 16 11:26:57 driver start_cu.sh[3601]: ifconfig lo txqueuelen 80000
|
|
14
|
Jun 16 11:26:57 driver start_cu.sh[3601]: sysctl: cannot stat /proc/sys/net/ipv6/conf/all/disable_ipv6: No such file or directory
|
|
15
|
Jun 16 11:26:57 driver start_cu.sh[3601]: net.core.netdev_max_backlog = 204800
|
|
16
|
Jun 16 11:26:57 driver start_cu.sh[3601]: net.core.optmem_max = 209715200
|
|
17
|
Jun 16 11:26:57 driver start_cu.sh[3601]: net.core.rmem_max = 209715200
|
|
18
|
Jun 16 11:26:57 driver start_cu.sh[3601]: net.core.wmem_max = 209715200
|
|
19
|
Jun 16 11:26:57 driver start_cu.sh[3601]: net.core.wmem_default = 209715200
|
|
20
|
Jun 16 11:26:57 driver start_cu.sh[3601]: net.core.rmem_default = 209715200
|
|
21
|
Jun 16 11:26:57 driver start_cu.sh[3601]: net.ipv4.udp_mem = 157286400 209715200 262144000
|
|
22
|
Jun 16 11:26:57 driver start_cu.sh[3601]: net.core.netdev_max_backlog = 65535
|
|
23
|
Jun 16 11:26:57 driver start_cu.sh[3601]: ********************************************************
|
|
24
|
Jun 16 11:26:57 driver start_cu.sh[3601]: System configuration done
|
|
25
|
Jun 16 11:26:57 driver start_cu.sh[3601]: ********************************************************
|
|
26
|
Jun 16 11:27:00 driver start_cu.sh[3601]: run_single_instance: end
|
|
27
|
Jun 16 11:27:00 driver start_cu.sh[3601]: ***************************************************************************
|
|
28
|
Jun 16 11:27:00 driver start_cu.sh[3601]: * CU VERSION
|
|
29
|
Jun 16 11:27:00 driver start_cu.sh[3601]: ***************************************************************************
|
|
30
|
Jun 16 11:27:00 driver start_cu.sh[3601]: * Version: YZS-NR-C-Rel_3.1.1_Pre1T1_4_2025-06-11T11:01:14
|
|
31
|
Jun 16 11:27:00 driver start_cu.sh[3601]: * Image Date: Jun 11 2025
|
|
32
|
Jun 16 11:27:00 driver start_cu.sh[3601]: * Image Time: 11:02:26
|
|
33
|
Jun 16 11:27:00 driver start_cu.sh[3601]: ***************************************************************************
|
|
34
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.140562][5][t: 548656865296][ERR:0] send_interval:%u file: app_cntrl.cpp, line: 1174
|
|
35
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [INF]: Scheduled changes not applied because of other existing connections.
|
|
36
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [INF]: Connection 8 created.
|
|
37
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [INF]: Session 1054 (user "root", CID 8) created.
|
|
38
|
Jun 16 11:27:00 driver start_cu.sh[3601]: GET_SERVICE_DIRECT,dir:7
|
|
39
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Size 0: Offset = 0, Size start = 0x7fb6cbe010, Size end = 0x7fb6db5130
|
|
40
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Size 1: Offset = 1012000, Size start = 0x7fb6db5130, Size end = 0x7fb7dbaa30
|
|
41
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Size 2: Offset = 17812000, Size start = 0x7fb7dbaa30, Size end = 0x7fbadcb530
|
|
42
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Size 3: Offset = 68212000, Size start = 0x7fbadcb530, Size end = 0x7fbe763f80
|
|
43
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Size 0: Offset = 0, Size start = 0x7fa63ae010, Size end = 0x7fa64a5130
|
|
44
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Size 1: Offset = 1012000, Size start = 0x7fa64a5130, Size end = 0x7fa9e9edf0
|
|
45
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Size 2: Offset = 61804000, Size start = 0x7fa9e9edf0, Size end = 0x7fa9ea5240
|
|
46
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Size 3: Offset = 61829680, Size start = 0x7fa9ea5240, Size end = 0x7fb66eaac0
|
|
47
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Size 4: Offset = 271829680, Size start = 0x7fb66eaac0, Size end = 0x7fb66ed210
|
|
48
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Size 0: Offset = 0, Size start = 0x7fa53c5010, Size end = 0x7fa53da7d0
|
|
49
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Size 1: Offset = 88000, Size start = 0x7fa53da7d0, Size end = 0x7fa54983d0
|
|
50
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Size 2: Offset = 865216, Size start = 0x7fa54983d0, Size end = 0x7fa54b7ad0
|
|
51
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Size 3: Offset = 993984, Size start = 0x7fa54b7ad0, Size end = 0x7fa55b20d0
|
|
52
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Size 4: Offset = 2019520, Size start = 0x7fa55b20d0, Size end = 0x7fa55f0930
|
|
53
|
Jun 16 11:27:00 driver start_cu.sh[3601]: num_data_pools:3,file_name:../config/pool_config.txt,config_mapper size:3
|
|
54
|
Jun 16 11:27:00 driver start_cu.sh[3601]: num_sizes:1,pool_id:2044,,block_size:80,num_blocks:50000,,free_threshold:2000
|
|
55
|
Jun 16 11:27:00 driver start_cu.sh[3601]: num_sizes:1,pool_id:2045,,block_size:80,num_blocks:12000,,free_threshold:2000
|
|
56
|
Jun 16 11:27:00 driver start_cu.sh[3601]: num_sizes:1,pool_id:2046,,block_size:80,num_blocks:2000,,free_threshold:500
|
|
57
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.468024][5][t: 548656865296][GNB_MGR] cpu_info_processor::get_cpu_thread_num file: cpu_info_processor.cpp, line: 50
|
|
58
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.483078][5][t: 548656865296][GNB_MGR] lineBuff:%s,size:%u file: cpu_info_processor.cpp, line: 67
|
|
59
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.483415][5][t: 548656865296][APP] get_cpu_thread_num,thread_num:%d file: app_cntrl.cpp, line: 159
|
|
60
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [INF]: Scheduled changes not applied because of other existing connections.
|
|
61
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [INF]: Connection 9 created.
|
|
62
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [INF]: Session 1055 (user "root", CID 9) created.
|
|
63
|
Jun 16 11:27:00 driver start_cu.sh[3601]: xzb app_int_end_ms: 413 ms
|
|
64
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Succeeded to open shm,id:7,oriKey:3
|
|
65
|
Jun 16 11:27:00 driver start_cu.sh[3601]: xzb thread_name: TIMER, _thread_id: 3667, thr_id: 547998843312
|
|
66
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Succeeded to open shm,id:8,oriKey:16
|
|
67
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.604967][5][t: 548656865296][PDCP_C_CTRL] file: pdcp_c_db.h, line: 661
|
|
68
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.605329][5][t: 548656865296][PDCP_RX_CTRL] file: pdcp_db.h, line: 3829
|
|
69
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.605569][5][t: 548656865296][SDAP_RX_C] file: sdap_db.h, line: 727
|
|
70
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.605819][5][t: 548656865296][EGTPU_COMMON] file: egtpu_db.h, line: 658
|
|
71
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.606054][5][t: 548656865296][EGTPU_COMMON] file: egtpu_db.h, line: 658
|
|
72
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.606495][5][t: 548656865296][BEARER_MGR] file: bearer_mgr_db.h, line: 1055
|
|
73
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.606761][5][t: 548656865296][UE_CONN_MGR] file: ue_conn_mgr_db.h, line: 2475
|
|
74
|
Jun 16 11:27:00 driver start_cu.sh[3601]: xzb app_modules_end_ms: 477 ms
|
|
75
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [INF]: Scheduled changes not applied because of other existing connections.
|
|
76
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [INF]: Connection 10 created.
|
|
77
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [INF]: Session 1056 (user "root", CID 10) created.
|
|
78
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.675729][5][t: 548656865296][APP] INIT LOAD CONFIG INFO SUCCESS! file: app_main.cpp, line: 77
|
|
79
|
Jun 16 11:27:00 driver start_cu.sh[3601]: xzb config_end_ms: 546 ms
|
|
80
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.676548][5][t: 548656865296][APP] stat_log_threshold_timestamp:%llu file: config_cu_main.cpp, line: 85
|
|
81
|
Jun 16 11:27:00 driver start_cu.sh[3601]: xzb thread_name: COMMON_CNTRL, _thread_id: 3673, thr_id: 547987980720
|
|
82
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Succeeded to open shm,id:9,oriKey:14
|
|
83
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.677379][5][t: 548656865296][APP] file: app_cntrl.cpp, line: 421
|
|
84
|
Jun 16 11:27:00 driver start_cu.sh[3601]: xzb thread_name: SCTP_NG_CLIENT, _thread_id: 3674, thr_id: 547985879472
|
|
85
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Succeeded to open shm,id:10,oriKey:0
|
|
86
|
Jun 16 11:27:00 driver start_cu.sh[3601]: xzb thread_name: SCTP_XN_CLIENT, _thread_id: 3675, thr_id: 547984724400
|
|
87
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Succeeded to open shm,id:11,oriKey:1
|
|
88
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.678569][5][t: 548656865296][PDCP_C_CTRL] file: pdcp_c_cntrl.cpp, line: 67
|
|
89
|
Jun 16 11:27:00 driver start_cu.sh[3601]: xzb thread_name: UE_CNTRL0, _thread_id: 3676, thr_id: 547983569328
|
|
90
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Succeeded to open shm,id:12,oriKey:12
|
|
91
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.679258][5][t: 548656865296][APP] file: app_cntrl.cpp, line: 585
|
|
92
|
Jun 16 11:27:00 driver start_cu.sh[3601]: xzb thread_name: RM0, _thread_id: 3677, thr_id: 547961545136
|
|
93
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Succeeded to open shm,id:13,oriKey:11
|
|
94
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.679943][5][t: 548656865296][APP] file: app_cntrl.cpp, line: 601
|
|
95
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.680134][5][t: 548656865296][APP] get_service_direct dir:%u file: app_cntrl.cpp, line: 747
|
|
96
|
Jun 16 11:27:00 driver start_cu.sh[3601]: xzb thread_name: UDP_RX_DL, _thread_id: 3678, thr_id: 547959443888
|
|
97
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.680459][5][t: 547959443888][APP] do.it send_restore_udp_alarm, pos:%s file: alarm_mgr.cpp, line: 272
|
|
98
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Succeeded to open shm,id:14,oriKey:10
|
|
99
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.681073][5][t: 548656865296][APP] file: app_cntrl.cpp, line: 815
|
|
100
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.681546][5][t: 548656865296][APP] f1_shm_switch:%u file: config_cu_main.cpp, line: 41
|
|
101
|
Jun 16 11:27:00 driver start_cu.sh[3601]: f1_shm_switch:1
|
|
102
|
Jun 16 11:27:00 driver start_cu.sh[3601]: xzb thread_name: UDP_RX_UL, _thread_id: 3680, thr_id: 547956289968
|
|
103
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Succeeded to open shm,id:16,oriKey:9
|
|
104
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.682647][5][t: 548656865296][APP] file: app_cntrl.cpp, line: 912
|
|
105
|
Jun 16 11:27:00 driver start_cu.sh[3601]: xzb thread_name: SHM_RX_UL, _thread_id: 3681, thr_id: 547952091568
|
|
106
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Succeeded to open shm,id:17,oriKey:5
|
|
107
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.686544][5][t: 548656865296][EGTPU_COMMON] file: egtpu_db.h, line: 685
|
|
108
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.686773][5][t: 548656865296][SDAP_TX_C] file: sdap_cntrl.cpp, line: 61
|
|
109
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.686967][5][t: 548656865296][PDCP_TX_CTRL] file: pdcp_cntrl.cpp, line: 77
|
|
110
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.687168][5][t: 548656865296][EGTPU_COMMON] file: egtpu_db.h, line: 692
|
|
111
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [INF]: Scheduled changes not applied because of other existing connections.
|
|
112
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [INF]: Connection 11 created.
|
|
113
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [INF]: Session 1057 (user "root", CID 11) created.
|
|
114
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [INF]: Scheduled changes not applied because of other existing connections.
|
|
115
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [1]Err: Read mode, can't send.
|
|
116
|
Jun 16 11:27:00 driver start_cu.sh[3601]: ylTest udp_rx_ul_thread,dir:7
|
|
117
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [INF]: Connection 12 created.
|
|
118
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [INF]: Session 1058 (user "root", CID 12) created.
|
|
119
|
Jun 16 11:27:00 driver start_cu.sh[3601]: ylTest,dir:7
|
|
120
|
Jun 16 11:27:00 driver start_cu.sh[3601]: xzb thread_name: DL0, _thread_id: 3682, thr_id: 547809354160
|
|
121
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Succeeded to open shm,id:85,oriKey:8
|
|
122
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.789387][5][t: 548656865296][APP] file: app_cntrl.cpp, line: 1001
|
|
123
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.789584][5][t: 548656865296][EGTPU_COMMON] file: egtpu_db.h, line: 678
|
|
124
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.789745][5][t: 548656865296][SDAP_RX_C] file: sdap_cntrl.cpp, line: 94
|
|
125
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.789927][5][t: 548656865296][PDCP_RX_CTRL] file: pdcp_cntrl.cpp, line: 123
|
|
126
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.790109][5][t: 548656865296][EGTPU_COMMON] file: egtpu_db.h, line: 699
|
|
127
|
Jun 16 11:27:00 driver start_cu.sh[3601]: xzb thread_name: UL0, _thread_id: 3683, thr_id: 547787329968
|
|
128
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Succeeded to open shm,id:86,oriKey:7
|
|
129
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.790830][5][t: 548656865296][APP] file: app_cntrl.cpp, line: 1062
|
|
130
|
Jun 16 11:27:00 driver start_cu.sh[3601]: xzb thread_name: SCTP_SERVER, _thread_id: 3684, thr_id: 547765305776
|
|
131
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Succeeded to open shm,id:87,oriKey:6
|
|
132
|
Jun 16 11:27:00 driver start_cu.sh[3601]: xzb sctp_server_end_ms: 661 ms
|
|
133
|
Jun 16 11:27:00 driver start_cu.sh[3601]: xzb thread_name: OAM_AGENT, _thread_id: 3685, thr_id: 547763204528
|
|
134
|
Jun 16 11:27:00 driver start_cu.sh[3601]: ---------------------------------------------------------
|
|
135
|
Jun 16 11:27:00 driver start_cu.sh[3601]: STARTING GNB CONFIGURATION
|
|
136
|
Jun 16 11:27:00 driver start_cu.sh[3601]: ---------------------------------------------------------
|
|
137
|
Jun 16 11:27:00 driver start_cu.sh[3601]: Succeeded to open shm,id:88,oriKey:4
|
|
138
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.792673][5][t: 548656865296][APP] file: app_cntrl.cpp, line: 512
|
|
139
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.793089][TRC][t: 548656865296][APP] Version: YZS-NR-C-Rel_3.1.1_Pre1T1_4_2025-06-11T11:01:14 file: version.cpp, line: 21
|
|
140
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.793363][TRC][t: 548656865296][APP] The process ID is %d file: version.cpp, line: 22
|
|
141
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [INF]: Scheduled changes not applied because of other existing connections.
|
|
142
|
Jun 16 11:27:00 driver start_cu.sh[3601]: SCTP F1AP Init: IP=192.168.62.241 PORT=38472
|
|
143
|
Jun 16 11:27:00 driver start_cu.sh[3601]: SCTP XNAP_CLIENT local: IP=192.168.62.241 PORT=38423
|
|
144
|
Jun 16 11:27:00 driver start_cu.sh[3601]: SCTP XNAP_CLIENT remote: IP=192.168.62.241 PORT=38422
|
|
145
|
Jun 16 11:27:00 driver start_cu.sh[3601]: SCTP XNAP_SERVER local: IP=192.168.62.241 PORT=38422
|
|
146
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [INF]: Connection 13 created.
|
|
147
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [INF]: Scheduled changes not applied because of other existing connections.
|
|
148
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [INF]: Session 1059 (user "root", CID 13) created.
|
|
149
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.858044][TRC][t: 548656865296][APP] set_thread_infos_2_data_pool dir:%u file: app_cntrl.cpp, line: 1114
|
|
150
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.858426][TRC][t: 548656865296][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
|
151
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.858684][TRC][t: 548656865296][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
|
152
|
Jun 16 11:27:00 driver start_cu.sh[3601]: success t_id:547809354160,tName:DL0
|
|
153
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.859189][TRC][t: 548656865296][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
|
154
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.859473][TRC][t: 548656865296][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
|
155
|
Jun 16 11:27:00 driver start_cu.sh[3601]: success t_id:547952091568,tName:SHM_RX_UL
|
|
156
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.859894][TRC][t: 548656865296][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
|
157
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.860089][TRC][t: 548656865296][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
|
158
|
Jun 16 11:27:00 driver start_cu.sh[3601]: success t_id:547959443888,tName:UDP_RX_DL
|
|
159
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.860439][TRC][t: 548656865296][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
|
160
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.860598][TRC][t: 548656865296][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
|
161
|
Jun 16 11:27:00 driver start_cu.sh[3601]: success t_id:547956289968,tName:UDP_RX_UL
|
|
162
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.860944][TRC][t: 548656865296][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
|
163
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.861117][TRC][t: 548656865296][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
|
164
|
Jun 16 11:27:00 driver start_cu.sh[3601]: success t_id:547957342640,tName:UDP_TX_UL
|
|
165
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.861454][TRC][t: 548656865296][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
|
166
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.861631][TRC][t: 548656865296][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
|
167
|
Jun 16 11:27:00 driver start_cu.sh[3601]: success t_id:547983569328,tName:UE_CNTRL0
|
|
168
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.861968][TRC][t: 548656865296][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
|
169
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.862160][TRC][t: 548656865296][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
|
170
|
Jun 16 11:27:00 driver start_cu.sh[3601]: success t_id:547787329968,tName:UL0
|
|
171
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [16/06/2025 11:27:00.862520][TRC][t: 548656865296][APP] create_event_timer time:%u file: common_cntrl_thread.cpp, line: 682
|
|
172
|
Jun 16 11:27:00 driver start_cu.sh[3601]: create_event_timer,time:1000
|
|
173
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [INF]: Connection 14 created.
|
|
174
|
Jun 16 11:27:00 driver start_cu.sh[3601]: [INF]: Session 1060 (user "root", CID 14) created.
|
|
175
|
Jun 16 11:27:01 driver start_cu.sh[3601]: ========== LISTENING FOR NOTIFICATIONS ==========
|
|
176
|
Jun 16 11:27:01 driver start_cu.sh[3601]: SCTP NGAP local: IP=192.168.62.241 PORT=38412
|
|
177
|
Jun 16 11:27:01 driver start_cu.sh[3601]: SCTP NGAP remote: IP=192.168.62.10 PORT=38412
|
|
178
|
Jun 16 11:27:01 driver start_cu.sh[3601]: xzb f1_end_ms: 1121 ms
|
|
179
|
Jun 16 11:27:06 driver systemd[1]: Stopping cu...
|
|
180
|
Jun 16 11:27:06 driver systemd[1]: cu.service: Main process exited, code=killed, status=15/TERM
|
|
181
|
Jun 16 11:27:06 driver systemd[1]: cu.service: Succeeded.
|
|
182
|
Jun 16 11:27:06 driver systemd[1]: Stopped cu.
|
|
183
|
Jun 16 11:27:06 driver systemd[1]: Started cu.
|
|
184
|
Jun 16 11:27:06 driver start_cu.sh[3773]: ethtool -G eth0 rx 4096
|
|
185
|
Jun 16 11:27:06 driver start_cu.sh[3773]: ethtool -G eth0 tx 4096
|
|
186
|
Jun 16 11:27:06 driver start_cu.sh[3773]: /yzmm/gnb/cu/bin/start_cu.sh: line 21: [: ==: unary operator expected
|
|
187
|
Jun 16 11:27:06 driver start_cu.sh[3773]: ifconfig eth0 mtu 1600
|
|
188
|
Jun 16 11:27:06 driver start_cu.sh[3773]: ifconfig eth0 txqueuelen 80000
|
|
189
|
Jun 16 11:27:06 driver start_cu.sh[3773]: ethtool -G eth2 rx 4096
|
|
190
|
Jun 16 11:27:06 driver start_cu.sh[3773]: ethtool -G eth2 tx 4096
|
|
191
|
Jun 16 11:27:06 driver start_cu.sh[3773]: /yzmm/gnb/cu/bin/start_cu.sh: line 21: [: ==: unary operator expected
|
|
192
|
Jun 16 11:27:06 driver start_cu.sh[3773]: ifconfig eth2 mtu 1600
|
|
193
|
Jun 16 11:27:06 driver start_cu.sh[3773]: ifconfig eth2 txqueuelen 80000
|
|
194
|
Jun 16 11:27:06 driver start_cu.sh[3773]: ifconfig lo txqueuelen 80000
|
|
195
|
Jun 16 11:27:06 driver start_cu.sh[3773]: sysctl: cannot stat /proc/sys/net/ipv6/conf/all/disable_ipv6: No such file or directory
|
|
196
|
Jun 16 11:27:06 driver start_cu.sh[3773]: net.core.netdev_max_backlog = 204800
|
|
197
|
Jun 16 11:27:06 driver start_cu.sh[3773]: net.core.optmem_max = 209715200
|
|
198
|
Jun 16 11:27:06 driver start_cu.sh[3773]: net.core.rmem_max = 209715200
|
|
199
|
Jun 16 11:27:06 driver start_cu.sh[3773]: net.core.wmem_max = 209715200
|
|
200
|
Jun 16 11:27:06 driver start_cu.sh[3773]: net.core.wmem_default = 209715200
|
|
201
|
Jun 16 11:27:06 driver start_cu.sh[3773]: net.core.rmem_default = 209715200
|
|
202
|
Jun 16 11:27:06 driver start_cu.sh[3773]: net.ipv4.udp_mem = 157286400 209715200 262144000
|
|
203
|
Jun 16 11:27:06 driver start_cu.sh[3773]: net.core.netdev_max_backlog = 65535
|
|
204
|
Jun 16 11:27:06 driver start_cu.sh[3773]: ********************************************************
|
|
205
|
Jun 16 11:27:06 driver start_cu.sh[3773]: System configuration done
|
|
206
|
Jun 16 11:27:06 driver start_cu.sh[3773]: ********************************************************
|
|
207
|
Jun 16 11:27:09 driver start_cu.sh[3773]: run_single_instance: end
|
|
208
|
Jun 16 11:27:09 driver start_cu.sh[3773]: ***************************************************************************
|
|
209
|
Jun 16 11:27:09 driver start_cu.sh[3773]: * CU VERSION
|
|
210
|
Jun 16 11:27:09 driver start_cu.sh[3773]: ***************************************************************************
|
|
211
|
Jun 16 11:27:09 driver start_cu.sh[3773]: * Version: YZS-NR-C-Rel_3.1.1_Pre1T1_4_2025-06-11T11:01:14
|
|
212
|
Jun 16 11:27:09 driver start_cu.sh[3773]: * Image Date: Jun 11 2025
|
|
213
|
Jun 16 11:27:09 driver start_cu.sh[3773]: * Image Time: 11:02:26
|
|
214
|
Jun 16 11:27:09 driver start_cu.sh[3773]: ***************************************************************************
|
|
215
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.252056][5][t: 548589174800][ERR:0] send_interval:%u file: app_cntrl.cpp, line: 1174
|
|
216
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [INF]: Scheduled changes not applied because of other existing connections.
|
|
217
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [INF]: Connection 19 created.
|
|
218
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [INF]: Session 1134 (user "root", CID 19) created.
|
|
219
|
Jun 16 11:27:09 driver start_cu.sh[3773]: GET_SERVICE_DIRECT,dir:7
|
|
220
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Size 0: Offset = 0, Size start = 0x7fb2c30010, Size end = 0x7fb2d27130
|
|
221
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Size 1: Offset = 1012000, Size start = 0x7fb2d27130, Size end = 0x7fb3d2ca30
|
|
222
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Size 2: Offset = 17812000, Size start = 0x7fb3d2ca30, Size end = 0x7fb6d3d530
|
|
223
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Size 3: Offset = 68212000, Size start = 0x7fb6d3d530, Size end = 0x7fba6d5f80
|
|
224
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Size 0: Offset = 0, Size start = 0x7fa2320010, Size end = 0x7fa2417130
|
|
225
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Size 1: Offset = 1012000, Size start = 0x7fa2417130, Size end = 0x7fa5e10df0
|
|
226
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Size 2: Offset = 61804000, Size start = 0x7fa5e10df0, Size end = 0x7fa5e17240
|
|
227
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Size 3: Offset = 61829680, Size start = 0x7fa5e17240, Size end = 0x7fb265cac0
|
|
228
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Size 4: Offset = 271829680, Size start = 0x7fb265cac0, Size end = 0x7fb265f210
|
|
229
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Size 0: Offset = 0, Size start = 0x7fa1337010, Size end = 0x7fa134c7d0
|
|
230
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Size 1: Offset = 88000, Size start = 0x7fa134c7d0, Size end = 0x7fa140a3d0
|
|
231
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Size 2: Offset = 865216, Size start = 0x7fa140a3d0, Size end = 0x7fa1429ad0
|
|
232
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Size 3: Offset = 993984, Size start = 0x7fa1429ad0, Size end = 0x7fa15240d0
|
|
233
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Size 4: Offset = 2019520, Size start = 0x7fa15240d0, Size end = 0x7fa1562930
|
|
234
|
Jun 16 11:27:09 driver start_cu.sh[3773]: num_data_pools:3,file_name:../config/pool_config.txt,config_mapper size:3
|
|
235
|
Jun 16 11:27:09 driver start_cu.sh[3773]: num_sizes:1,pool_id:2044,,block_size:80,num_blocks:50000,,free_threshold:2000
|
|
236
|
Jun 16 11:27:09 driver start_cu.sh[3773]: num_sizes:1,pool_id:2045,,block_size:80,num_blocks:12000,,free_threshold:2000
|
|
237
|
Jun 16 11:27:09 driver start_cu.sh[3773]: num_sizes:1,pool_id:2046,,block_size:80,num_blocks:2000,,free_threshold:500
|
|
238
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.585906][5][t: 548589174800][GNB_MGR] cpu_info_processor::get_cpu_thread_num file: cpu_info_processor.cpp, line: 50
|
|
239
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.610690][5][t: 548589174800][GNB_MGR] lineBuff:%s,size:%u file: cpu_info_processor.cpp, line: 67
|
|
240
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.611059][5][t: 548589174800][APP] get_cpu_thread_num,thread_num:%d file: app_cntrl.cpp, line: 159
|
|
241
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [INF]: Scheduled changes not applied because of other existing connections.
|
|
242
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [INF]: Connection 20 created.
|
|
243
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [INF]: Session 1135 (user "root", CID 20) created.
|
|
244
|
Jun 16 11:27:09 driver start_cu.sh[3773]: xzb app_int_end_ms: 433 ms
|
|
245
|
Jun 16 11:27:09 driver start_cu.sh[3773]: shm already exist, oriKey:303
|
|
246
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Succeeded to open shm,id:7,oriKey:3
|
|
247
|
Jun 16 11:27:09 driver start_cu.sh[3773]: xzb thread_name: TIMER, _thread_id: 3838, thr_id: 547931152816
|
|
248
|
Jun 16 11:27:09 driver start_cu.sh[3773]: shm already exist, oriKey:316
|
|
249
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Succeeded to open shm,id:8,oriKey:16
|
|
250
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.731478][5][t: 548589174800][PDCP_C_CTRL] file: pdcp_c_db.h, line: 661
|
|
251
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.731826][5][t: 548589174800][PDCP_RX_CTRL] file: pdcp_db.h, line: 3829
|
|
252
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.732019][5][t: 548589174800][SDAP_RX_C] file: sdap_db.h, line: 727
|
|
253
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.732270][5][t: 548589174800][EGTPU_COMMON] file: egtpu_db.h, line: 658
|
|
254
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.732479][5][t: 548589174800][EGTPU_COMMON] file: egtpu_db.h, line: 658
|
|
255
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.732666][5][t: 548589174800][BEARER_MGR] file: bearer_mgr_db.h, line: 1055
|
|
256
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.732883][5][t: 548589174800][UE_CONN_MGR] file: ue_conn_mgr_db.h, line: 2475
|
|
257
|
Jun 16 11:27:09 driver start_cu.sh[3773]: xzb app_modules_end_ms: 495 ms
|
|
258
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [INF]: Scheduled changes not applied because of other existing connections.
|
|
259
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [INF]: Connection 21 created.
|
|
260
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [INF]: Session 1136 (user "root", CID 21) created.
|
|
261
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.800845][5][t: 548589174800][APP] INIT LOAD CONFIG INFO SUCCESS! file: app_main.cpp, line: 77
|
|
262
|
Jun 16 11:27:09 driver start_cu.sh[3773]: xzb config_end_ms: 563 ms
|
|
263
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.801715][5][t: 548589174800][APP] stat_log_threshold_timestamp:%llu file: config_cu_main.cpp, line: 85
|
|
264
|
Jun 16 11:27:09 driver start_cu.sh[3773]: xzb thread_name: COMMON_CNTRL, _thread_id: 3840, thr_id: 547920290224
|
|
265
|
Jun 16 11:27:09 driver start_cu.sh[3773]: shm already exist, oriKey:314
|
|
266
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Succeeded to open shm,id:9,oriKey:14
|
|
267
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.802607][5][t: 548589174800][APP] file: app_cntrl.cpp, line: 421
|
|
268
|
Jun 16 11:27:09 driver start_cu.sh[3773]: xzb thread_name: SCTP_NG_CLIENT, _thread_id: 3841, thr_id: 547918188976
|
|
269
|
Jun 16 11:27:09 driver start_cu.sh[3773]: shm already exist, oriKey:300
|
|
270
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Succeeded to open shm,id:10,oriKey:0
|
|
271
|
Jun 16 11:27:09 driver start_cu.sh[3773]: xzb thread_name: SCTP_XN_CLIENT, _thread_id: 3842, thr_id: 547917033904
|
|
272
|
Jun 16 11:27:09 driver start_cu.sh[3773]: shm already exist, oriKey:301
|
|
273
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Succeeded to open shm,id:11,oriKey:1
|
|
274
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.804041][5][t: 548589174800][PDCP_C_CTRL] file: pdcp_c_cntrl.cpp, line: 67
|
|
275
|
Jun 16 11:27:09 driver start_cu.sh[3773]: xzb thread_name: UE_CNTRL0, _thread_id: 3843, thr_id: 547915878832
|
|
276
|
Jun 16 11:27:09 driver start_cu.sh[3773]: shm already exist, oriKey:312
|
|
277
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Succeeded to open shm,id:12,oriKey:12
|
|
278
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.804854][5][t: 548589174800][APP] file: app_cntrl.cpp, line: 585
|
|
279
|
Jun 16 11:27:09 driver start_cu.sh[3773]: xzb thread_name: RM0, _thread_id: 3844, thr_id: 547893854640
|
|
280
|
Jun 16 11:27:09 driver start_cu.sh[3773]: shm already exist, oriKey:311
|
|
281
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Succeeded to open shm,id:13,oriKey:11
|
|
282
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.805698][5][t: 548589174800][APP] file: app_cntrl.cpp, line: 601
|
|
283
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.805862][5][t: 548589174800][APP] get_service_direct dir:%u file: app_cntrl.cpp, line: 747
|
|
284
|
Jun 16 11:27:09 driver start_cu.sh[3773]: xzb thread_name: UDP_RX_DL, _thread_id: 3845, thr_id: 547891753392
|
|
285
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.806189][5][t: 547891753392][APP] do.it send_restore_udp_alarm, pos:%s file: alarm_mgr.cpp, line: 272
|
|
286
|
Jun 16 11:27:09 driver start_cu.sh[3773]: shm already exist, oriKey:310
|
|
287
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Succeeded to open shm,id:14,oriKey:10
|
|
288
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.806989][5][t: 548589174800][APP] file: app_cntrl.cpp, line: 815
|
|
289
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.807471][5][t: 548589174800][APP] f1_shm_switch:%u file: config_cu_main.cpp, line: 41
|
|
290
|
Jun 16 11:27:09 driver start_cu.sh[3773]: f1_shm_switch:1
|
|
291
|
Jun 16 11:27:09 driver start_cu.sh[3773]: xzb thread_name: UDP_RX_UL, _thread_id: 3847, thr_id: 547888599472
|
|
292
|
Jun 16 11:27:09 driver start_cu.sh[3773]: shm already exist, oriKey:309
|
|
293
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Succeeded to open shm,id:16,oriKey:9
|
|
294
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.808640][5][t: 548589174800][APP] file: app_cntrl.cpp, line: 912
|
|
295
|
Jun 16 11:27:09 driver start_cu.sh[3773]: xzb thread_name: SHM_RX_UL, _thread_id: 3848, thr_id: 547884401072
|
|
296
|
Jun 16 11:27:09 driver start_cu.sh[3773]: shm already exist, oriKey:305
|
|
297
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Succeeded to open shm,id:17,oriKey:5
|
|
298
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.814604][5][t: 548589174800][EGTPU_COMMON] file: egtpu_db.h, line: 685
|
|
299
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.814835][5][t: 548589174800][SDAP_TX_C] file: sdap_cntrl.cpp, line: 61
|
|
300
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.815090][5][t: 548589174800][PDCP_TX_CTRL] file: pdcp_cntrl.cpp, line: 77
|
|
301
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.815330][5][t: 548589174800][EGTPU_COMMON] file: egtpu_db.h, line: 692
|
|
302
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [INF]: Scheduled changes not applied because of other existing connections.
|
|
303
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [INF]: Connection 22 created.
|
|
304
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [INF]: Session 1137 (user "root", CID 22) created.
|
|
305
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [INF]: Scheduled changes not applied because of other existing connections.
|
|
306
|
Jun 16 11:27:09 driver start_cu.sh[3773]: ylTest udp_rx_ul_thread,dir:7
|
|
307
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [INF]: Connection 23 created.
|
|
308
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [INF]: Session 1138 (user "root", CID 23) created.
|
|
309
|
Jun 16 11:27:09 driver start_cu.sh[3773]: ylTest,dir:7
|
|
310
|
Jun 16 11:27:09 driver start_cu.sh[3773]: xzb thread_name: DL0, _thread_id: 3849, thr_id: 547741680048
|
|
311
|
Jun 16 11:27:09 driver start_cu.sh[3773]: shm already exist, oriKey:308
|
|
312
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Succeeded to open shm,id:85,oriKey:8
|
|
313
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.914513][5][t: 548589174800][APP] file: app_cntrl.cpp, line: 1001
|
|
314
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.914687][5][t: 548589174800][EGTPU_COMMON] file: egtpu_db.h, line: 678
|
|
315
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.914876][5][t: 548589174800][SDAP_RX_C] file: sdap_cntrl.cpp, line: 94
|
|
316
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.915051][5][t: 548589174800][PDCP_RX_CTRL] file: pdcp_cntrl.cpp, line: 123
|
|
317
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.915234][5][t: 548589174800][EGTPU_COMMON] file: egtpu_db.h, line: 699
|
|
318
|
Jun 16 11:27:09 driver start_cu.sh[3773]: xzb thread_name: UL0, _thread_id: 3850, thr_id: 547719655856
|
|
319
|
Jun 16 11:27:09 driver start_cu.sh[3773]: shm already exist, oriKey:307
|
|
320
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Succeeded to open shm,id:86,oriKey:7
|
|
321
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.916149][5][t: 548589174800][APP] file: app_cntrl.cpp, line: 1062
|
|
322
|
Jun 16 11:27:09 driver start_cu.sh[3773]: xzb thread_name: SCTP_SERVER, _thread_id: 3851, thr_id: 547697631664
|
|
323
|
Jun 16 11:27:09 driver start_cu.sh[3773]: shm already exist, oriKey:306
|
|
324
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Succeeded to open shm,id:87,oriKey:6
|
|
325
|
Jun 16 11:27:09 driver start_cu.sh[3773]: xzb sctp_server_end_ms: 678 ms
|
|
326
|
Jun 16 11:27:09 driver start_cu.sh[3773]: xzb thread_name: OAM_AGENT, _thread_id: 3852, thr_id: 547695530416
|
|
327
|
Jun 16 11:27:09 driver start_cu.sh[3773]: ---------------------------------------------------------
|
|
328
|
Jun 16 11:27:09 driver start_cu.sh[3773]: STARTING GNB CONFIGURATION
|
|
329
|
Jun 16 11:27:09 driver start_cu.sh[3773]: ---------------------------------------------------------
|
|
330
|
Jun 16 11:27:09 driver start_cu.sh[3773]: shm already exist, oriKey:304
|
|
331
|
Jun 16 11:27:09 driver start_cu.sh[3773]: Succeeded to open shm,id:88,oriKey:4
|
|
332
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.918321][5][t: 548589174800][APP] file: app_cntrl.cpp, line: 512
|
|
333
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.918657][TRC][t: 548589174800][APP] Version: YZS-NR-C-Rel_3.1.1_Pre1T1_4_2025-06-11T11:01:14 file: version.cpp, line: 21
|
|
334
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.918883][TRC][t: 548589174800][APP] The process ID is %d file: version.cpp, line: 22
|
|
335
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [INF]: Scheduled changes not applied because of other existing connections.
|
|
336
|
Jun 16 11:27:09 driver start_cu.sh[3773]: SCTP F1AP Init: IP=192.168.62.241 PORT=38472
|
|
337
|
Jun 16 11:27:09 driver start_cu.sh[3773]: SCTP XNAP_CLIENT local: IP=192.168.62.241 PORT=38423
|
|
338
|
Jun 16 11:27:09 driver start_cu.sh[3773]: SCTP XNAP_CLIENT remote: IP=192.168.62.241 PORT=38422
|
|
339
|
Jun 16 11:27:09 driver start_cu.sh[3773]: SCTP XNAP_SERVER local: IP=192.168.62.241 PORT=38422
|
|
340
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [INF]: Connection 24 created.
|
|
341
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [INF]: Scheduled changes not applied because of other existing connections.
|
|
342
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [INF]: Session 1139 (user "root", CID 24) created.
|
|
343
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.977832][TRC][t: 548589174800][APP] set_thread_infos_2_data_pool dir:%u file: app_cntrl.cpp, line: 1114
|
|
344
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.978241][TRC][t: 548589174800][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
|
345
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.978511][TRC][t: 548589174800][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
|
346
|
Jun 16 11:27:09 driver start_cu.sh[3773]: success t_id:547741680048,tName:DL0
|
|
347
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.978955][TRC][t: 548589174800][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
|
348
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.979228][TRC][t: 548589174800][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
|
349
|
Jun 16 11:27:09 driver start_cu.sh[3773]: success t_id:547884401072,tName:SHM_RX_UL
|
|
350
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.979724][TRC][t: 548589174800][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
|
351
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.979911][TRC][t: 548589174800][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
|
352
|
Jun 16 11:27:09 driver start_cu.sh[3773]: success t_id:547891753392,tName:UDP_RX_DL
|
|
353
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.980281][TRC][t: 548589174800][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
|
354
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.980474][TRC][t: 548589174800][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
|
355
|
Jun 16 11:27:09 driver start_cu.sh[3773]: success t_id:547888599472,tName:UDP_RX_UL
|
|
356
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.980837][TRC][t: 548589174800][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
|
357
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.981009][TRC][t: 548589174800][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
|
358
|
Jun 16 11:27:09 driver start_cu.sh[3773]: success t_id:547889652144,tName:UDP_TX_UL
|
|
359
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.981400][TRC][t: 548589174800][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
|
360
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.981588][TRC][t: 548589174800][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
|
361
|
Jun 16 11:27:09 driver start_cu.sh[3773]: success t_id:547915878832,tName:UE_CNTRL0
|
|
362
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.981929][TRC][t: 548589174800][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
|
363
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.982112][TRC][t: 548589174800][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
|
364
|
Jun 16 11:27:09 driver start_cu.sh[3773]: success t_id:547719655856,tName:UL0
|
|
365
|
Jun 16 11:27:09 driver start_cu.sh[3773]: [16/06/2025 11:27:09.982532][TRC][t: 548589174800][APP] create_event_timer time:%u file: common_cntrl_thread.cpp, line: 682
|
|
366
|
Jun 16 11:27:09 driver start_cu.sh[3773]: create_event_timer,time:1000
|
|
367
|
Jun 16 11:27:10 driver start_cu.sh[3773]: [INF]: Connection 25 created.
|
|
368
|
Jun 16 11:27:10 driver start_cu.sh[3773]: [INF]: Session 1140 (user "root", CID 25) created.
|
|
369
|
Jun 16 11:27:10 driver start_cu.sh[3773]: ========== LISTENING FOR NOTIFICATIONS ==========
|
|
370
|
Jun 16 11:27:10 driver start_cu.sh[3773]: SCTP NGAP local: IP=192.168.62.241 PORT=38412
|
|
371
|
Jun 16 11:27:10 driver start_cu.sh[3773]: SCTP NGAP remote: IP=192.168.62.10 PORT=38412
|
|
372
|
Jun 16 11:27:10 driver start_cu.sh[3773]: xzb f1_end_ms: 887 ms
|
|
373
|
Jun 16 11:27:10 driver start_cu.sh[3773]: #############################################################################################################################
|
|
374
|
Jun 16 11:27:10 driver start_cu.sh[3773]: CU is UP: DU ID= 1
|
|
375
|
Jun 16 11:27:10 driver start_cu.sh[3773]: #############################################################################################################################
|
