1
|
-- Logs begin at Thu 2019-02-14 10:11:58 UTC. --
|
2
|
Jun 16 11:37:50 driver systemd[1]: Started cu.
|
3
|
Jun 16 11:37:50 driver start_cu.sh[2659]: ethtool -G eth0 rx 4096
|
4
|
Jun 16 11:37:50 driver start_cu.sh[2659]: ethtool -G eth0 tx 4096
|
5
|
Jun 16 11:37:50 driver start_cu.sh[2659]: /yzmm/gnb/cu/bin/start_cu.sh: line 21: [: ==: unary operator expected
|
6
|
Jun 16 11:37:50 driver start_cu.sh[2659]: ifconfig eth0 mtu 1600
|
7
|
Jun 16 11:37:50 driver start_cu.sh[2659]: ifconfig eth0 txqueuelen 80000
|
8
|
Jun 16 11:37:50 driver start_cu.sh[2659]: ethtool -G eth2 rx 4096
|
9
|
Jun 16 11:37:50 driver start_cu.sh[2659]: ethtool -G eth2 tx 4096
|
10
|
Jun 16 11:37:50 driver start_cu.sh[2659]: /yzmm/gnb/cu/bin/start_cu.sh: line 21: [: ==: unary operator expected
|
11
|
Jun 16 11:37:50 driver start_cu.sh[2659]: ifconfig eth2 mtu 1600
|
12
|
Jun 16 11:37:50 driver start_cu.sh[2659]: ifconfig eth2 txqueuelen 80000
|
13
|
Jun 16 11:37:50 driver start_cu.sh[2659]: ifconfig lo txqueuelen 80000
|
14
|
Jun 16 11:37:50 driver start_cu.sh[2659]: sysctl: cannot stat /proc/sys/net/ipv6/conf/all/disable_ipv6: No such file or directory
|
15
|
Jun 16 11:37:50 driver start_cu.sh[2659]: net.core.netdev_max_backlog = 204800
|
16
|
Jun 16 11:37:50 driver start_cu.sh[2659]: net.core.optmem_max = 209715200
|
17
|
Jun 16 11:37:50 driver start_cu.sh[2659]: net.core.rmem_max = 209715200
|
18
|
Jun 16 11:37:50 driver start_cu.sh[2659]: net.core.wmem_max = 209715200
|
19
|
Jun 16 11:37:50 driver start_cu.sh[2659]: net.core.wmem_default = 209715200
|
20
|
Jun 16 11:37:50 driver start_cu.sh[2659]: net.core.rmem_default = 209715200
|
21
|
Jun 16 11:37:50 driver start_cu.sh[2659]: net.ipv4.udp_mem = 157286400 209715200 262144000
|
22
|
Jun 16 11:37:50 driver start_cu.sh[2659]: net.core.netdev_max_backlog = 65535
|
23
|
Jun 16 11:37:50 driver start_cu.sh[2659]: ********************************************************
|
24
|
Jun 16 11:37:50 driver start_cu.sh[2659]: System configuration done
|
25
|
Jun 16 11:37:50 driver start_cu.sh[2659]: ********************************************************
|
26
|
Jun 16 11:37:53 driver start_cu.sh[2659]: run_single_instance: end
|
27
|
Jun 16 11:37:53 driver start_cu.sh[2659]: ***************************************************************************
|
28
|
Jun 16 11:37:53 driver start_cu.sh[2659]: * CU VERSION
|
29
|
Jun 16 11:37:53 driver start_cu.sh[2659]: ***************************************************************************
|
30
|
Jun 16 11:37:53 driver start_cu.sh[2659]: * Version: YZS-NR-C-Rel_3.1.1_Pre1T1_4_2025-06-11T11:01:14
|
31
|
Jun 16 11:37:53 driver start_cu.sh[2659]: * Image Date: Jun 11 2025
|
32
|
Jun 16 11:37:53 driver start_cu.sh[2659]: * Image Time: 11:02:26
|
33
|
Jun 16 11:37:53 driver start_cu.sh[2659]: ***************************************************************************
|
34
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [16/06/2025 11:37:53.370659][5][t: 548449034256][ERR:0] send_interval:%u file: app_cntrl.cpp, line: 1174
|
35
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [INF]: Scheduled changes not applied because of other existing connections.
|
36
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [INF]: Connection 8 created.
|
37
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [INF]: Session 691 (user "root", CID 8) created.
|
38
|
Jun 16 11:37:53 driver start_cu.sh[2659]: GET_SERVICE_DIRECT,dir:7
|
39
|
Jun 16 11:37:53 driver start_cu.sh[2659]: Size 0: Offset = 0, Size start = 0x7faa68a010, Size end = 0x7faa781130
|
40
|
Jun 16 11:37:53 driver start_cu.sh[2659]: Size 1: Offset = 1012000, Size start = 0x7faa781130, Size end = 0x7fab786a30
|
41
|
Jun 16 11:37:53 driver start_cu.sh[2659]: Size 2: Offset = 17812000, Size start = 0x7fab786a30, Size end = 0x7fae797530
|
42
|
Jun 16 11:37:53 driver start_cu.sh[2659]: Size 3: Offset = 68212000, Size start = 0x7fae797530, Size end = 0x7fb212ff80
|
43
|
Jun 16 11:37:53 driver start_cu.sh[2659]: Size 0: Offset = 0, Size start = 0x7f99d7a010, Size end = 0x7f99e71130
|
44
|
Jun 16 11:37:53 driver start_cu.sh[2659]: Size 1: Offset = 1012000, Size start = 0x7f99e71130, Size end = 0x7f9d86adf0
|
45
|
Jun 16 11:37:53 driver start_cu.sh[2659]: Size 2: Offset = 61804000, Size start = 0x7f9d86adf0, Size end = 0x7f9d871240
|
46
|
Jun 16 11:37:53 driver start_cu.sh[2659]: Size 3: Offset = 61829680, Size start = 0x7f9d871240, Size end = 0x7faa0b6ac0
|
47
|
Jun 16 11:37:53 driver start_cu.sh[2659]: Size 4: Offset = 271829680, Size start = 0x7faa0b6ac0, Size end = 0x7faa0b9210
|
48
|
Jun 16 11:37:53 driver start_cu.sh[2659]: Size 0: Offset = 0, Size start = 0x7f98d91010, Size end = 0x7f98da67d0
|
49
|
Jun 16 11:37:53 driver start_cu.sh[2659]: Size 1: Offset = 88000, Size start = 0x7f98da67d0, Size end = 0x7f98e643d0
|
50
|
Jun 16 11:37:53 driver start_cu.sh[2659]: Size 2: Offset = 865216, Size start = 0x7f98e643d0, Size end = 0x7f98e83ad0
|
51
|
Jun 16 11:37:53 driver start_cu.sh[2659]: Size 3: Offset = 993984, Size start = 0x7f98e83ad0, Size end = 0x7f98f7e0d0
|
52
|
Jun 16 11:37:53 driver start_cu.sh[2659]: Size 4: Offset = 2019520, Size start = 0x7f98f7e0d0, Size end = 0x7f98fbc930
|
53
|
Jun 16 11:37:53 driver start_cu.sh[2659]: num_data_pools:3,file_name:../config/pool_config.txt,config_mapper size:3
|
54
|
Jun 16 11:37:53 driver start_cu.sh[2659]: num_sizes:1,pool_id:2044,,block_size:80,num_blocks:50000,,free_threshold:2000
|
55
|
Jun 16 11:37:53 driver start_cu.sh[2659]: num_sizes:1,pool_id:2045,,block_size:80,num_blocks:12000,,free_threshold:2000
|
56
|
Jun 16 11:37:53 driver start_cu.sh[2659]: num_sizes:1,pool_id:2046,,block_size:80,num_blocks:2000,,free_threshold:500
|
57
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [16/06/2025 11:37:53.699686][5][t: 548449034256][GNB_MGR] cpu_info_processor::get_cpu_thread_num file: cpu_info_processor.cpp, line: 50
|
58
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [16/06/2025 11:37:53.714991][5][t: 548449034256][GNB_MGR] lineBuff:%s,size:%u file: cpu_info_processor.cpp, line: 67
|
59
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [16/06/2025 11:37:53.715316][5][t: 548449034256][APP] get_cpu_thread_num,thread_num:%d file: app_cntrl.cpp, line: 159
|
60
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [INF]: Scheduled changes not applied because of other existing connections.
|
61
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [INF]: Connection 9 created.
|
62
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [INF]: Session 692 (user "root", CID 9) created.
|
63
|
Jun 16 11:37:53 driver start_cu.sh[2659]: xzb app_int_end_ms: 415 ms
|
64
|
Jun 16 11:37:53 driver start_cu.sh[2659]: Succeeded to open shm,id:7,oriKey:3
|
65
|
Jun 16 11:37:53 driver start_cu.sh[2659]: xzb thread_name: TIMER, _thread_id: 2723, thr_id: 547791012272
|
66
|
Jun 16 11:37:53 driver start_cu.sh[2659]: Succeeded to open shm,id:8,oriKey:16
|
67
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [16/06/2025 11:37:53.835133][5][t: 548449034256][PDCP_C_CTRL] file: pdcp_c_db.h, line: 661
|
68
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [16/06/2025 11:37:53.835458][5][t: 548449034256][PDCP_RX_CTRL] file: pdcp_db.h, line: 3829
|
69
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [16/06/2025 11:37:53.835647][5][t: 548449034256][SDAP_RX_C] file: sdap_db.h, line: 727
|
70
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [16/06/2025 11:37:53.835849][5][t: 548449034256][EGTPU_COMMON] file: egtpu_db.h, line: 658
|
71
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [16/06/2025 11:37:53.836101][5][t: 548449034256][EGTPU_COMMON] file: egtpu_db.h, line: 658
|
72
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [16/06/2025 11:37:53.836298][5][t: 548449034256][BEARER_MGR] file: bearer_mgr_db.h, line: 1055
|
73
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [16/06/2025 11:37:53.836515][5][t: 548449034256][UE_CONN_MGR] file: ue_conn_mgr_db.h, line: 2475
|
74
|
Jun 16 11:37:53 driver start_cu.sh[2659]: xzb app_modules_end_ms: 477 ms
|
75
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [INF]: Scheduled changes not applied because of other existing connections.
|
76
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [INF]: Connection 10 created.
|
77
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [INF]: Session 693 (user "root", CID 10) created.
|
78
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [16/06/2025 11:37:53.904469][5][t: 548449034256][APP] INIT LOAD CONFIG INFO SUCCESS! file: app_main.cpp, line: 77
|
79
|
Jun 16 11:37:53 driver start_cu.sh[2659]: xzb config_end_ms: 544 ms
|
80
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [16/06/2025 11:37:53.905285][5][t: 548449034256][APP] stat_log_threshold_timestamp:%llu file: config_cu_main.cpp, line: 85
|
81
|
Jun 16 11:37:53 driver start_cu.sh[2659]: xzb thread_name: COMMON_CNTRL, _thread_id: 2725, thr_id: 547780149680
|
82
|
Jun 16 11:37:53 driver start_cu.sh[2659]: Succeeded to open shm,id:9,oriKey:14
|
83
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [16/06/2025 11:37:53.906063][5][t: 548449034256][APP] file: app_cntrl.cpp, line: 421
|
84
|
Jun 16 11:37:53 driver start_cu.sh[2659]: xzb thread_name: SCTP_NG_CLIENT, _thread_id: 2726, thr_id: 547778048432
|
85
|
Jun 16 11:37:53 driver start_cu.sh[2659]: Succeeded to open shm,id:10,oriKey:0
|
86
|
Jun 16 11:37:53 driver start_cu.sh[2659]: xzb thread_name: SCTP_XN_CLIENT, _thread_id: 2727, thr_id: 547776893360
|
87
|
Jun 16 11:37:53 driver start_cu.sh[2659]: Succeeded to open shm,id:11,oriKey:1
|
88
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [16/06/2025 11:37:53.907223][5][t: 548449034256][PDCP_C_CTRL] file: pdcp_c_cntrl.cpp, line: 67
|
89
|
Jun 16 11:37:53 driver start_cu.sh[2659]: xzb thread_name: UE_CNTRL0, _thread_id: 2728, thr_id: 547775738288
|
90
|
Jun 16 11:37:53 driver start_cu.sh[2659]: Succeeded to open shm,id:12,oriKey:12
|
91
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [16/06/2025 11:37:53.907878][5][t: 548449034256][APP] file: app_cntrl.cpp, line: 585
|
92
|
Jun 16 11:37:53 driver start_cu.sh[2659]: xzb thread_name: RM0, _thread_id: 2729, thr_id: 547753714096
|
93
|
Jun 16 11:37:53 driver start_cu.sh[2659]: Succeeded to open shm,id:13,oriKey:11
|
94
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [16/06/2025 11:37:53.908594][5][t: 548449034256][APP] file: app_cntrl.cpp, line: 601
|
95
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [16/06/2025 11:37:53.908755][5][t: 548449034256][APP] get_service_direct dir:%u file: app_cntrl.cpp, line: 747
|
96
|
Jun 16 11:37:53 driver start_cu.sh[2659]: xzb thread_name: UDP_RX_DL, _thread_id: 2730, thr_id: 547751612848
|
97
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [16/06/2025 11:37:53.909104][5][t: 547751612848][APP] do.it send_restore_udp_alarm, pos:%s file: alarm_mgr.cpp, line: 272
|
98
|
Jun 16 11:37:53 driver start_cu.sh[2659]: Succeeded to open shm,id:14,oriKey:10
|
99
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [16/06/2025 11:37:53.909676][5][t: 548449034256][APP] file: app_cntrl.cpp, line: 815
|
100
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [16/06/2025 11:37:53.910238][5][t: 548449034256][APP] f1_shm_switch:%u file: config_cu_main.cpp, line: 41
|
101
|
Jun 16 11:37:53 driver start_cu.sh[2659]: f1_shm_switch:1
|
102
|
Jun 16 11:37:53 driver start_cu.sh[2659]: xzb thread_name: UDP_RX_UL, _thread_id: 2732, thr_id: 547748458928
|
103
|
Jun 16 11:37:53 driver start_cu.sh[2659]: Succeeded to open shm,id:16,oriKey:9
|
104
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [16/06/2025 11:37:53.911357][5][t: 548449034256][APP] file: app_cntrl.cpp, line: 912
|
105
|
Jun 16 11:37:53 driver start_cu.sh[2659]: xzb thread_name: SHM_RX_UL, _thread_id: 2733, thr_id: 547744260528
|
106
|
Jun 16 11:37:53 driver start_cu.sh[2659]: Succeeded to open shm,id:17,oriKey:5
|
107
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [16/06/2025 11:37:53.915296][5][t: 548449034256][EGTPU_COMMON] file: egtpu_db.h, line: 685
|
108
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [16/06/2025 11:37:53.915527][5][t: 548449034256][SDAP_TX_C] file: sdap_cntrl.cpp, line: 61
|
109
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [16/06/2025 11:37:53.915719][5][t: 548449034256][PDCP_TX_CTRL] file: pdcp_cntrl.cpp, line: 77
|
110
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [16/06/2025 11:37:53.915895][5][t: 548449034256][EGTPU_COMMON] file: egtpu_db.h, line: 692
|
111
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [INF]: Scheduled changes not applied because of other existing connections.
|
112
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [INF]: Connection 11 created.
|
113
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [INF]: Session 694 (user "root", CID 11) created.
|
114
|
Jun 16 11:37:53 driver start_cu.sh[2659]: [INF]: Scheduled changes not applied because of other existing connections.
|
115
|
Jun 16 11:37:53 driver start_cu.sh[2659]: ylTest udp_rx_ul_thread,dir:7
|
116
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [INF]: Connection 12 created.
|
117
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [INF]: Session 695 (user "root", CID 12) created.
|
118
|
Jun 16 11:37:54 driver start_cu.sh[2659]: ylTest,dir:7
|
119
|
Jun 16 11:37:54 driver start_cu.sh[2659]: xzb thread_name: DL0, _thread_id: 2734, thr_id: 547601551792
|
120
|
Jun 16 11:37:54 driver start_cu.sh[2659]: Succeeded to open shm,id:85,oriKey:8
|
121
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [16/06/2025 11:37:54.019279][5][t: 548449034256][APP] file: app_cntrl.cpp, line: 1001
|
122
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [16/06/2025 11:37:54.019485][5][t: 548449034256][EGTPU_COMMON] file: egtpu_db.h, line: 678
|
123
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [16/06/2025 11:37:54.019658][5][t: 548449034256][SDAP_RX_C] file: sdap_cntrl.cpp, line: 94
|
124
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [16/06/2025 11:37:54.019815][5][t: 548449034256][PDCP_RX_CTRL] file: pdcp_cntrl.cpp, line: 123
|
125
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [16/06/2025 11:37:54.020001][5][t: 548449034256][EGTPU_COMMON] file: egtpu_db.h, line: 699
|
126
|
Jun 16 11:37:54 driver start_cu.sh[2659]: xzb thread_name: UL0, _thread_id: 2735, thr_id: 547579527600
|
127
|
Jun 16 11:37:54 driver start_cu.sh[2659]: Succeeded to open shm,id:86,oriKey:7
|
128
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [16/06/2025 11:37:54.020753][5][t: 548449034256][APP] file: app_cntrl.cpp, line: 1062
|
129
|
Jun 16 11:37:54 driver start_cu.sh[2659]: xzb thread_name: SCTP_SERVER, _thread_id: 2736, thr_id: 547557503408
|
130
|
Jun 16 11:37:54 driver start_cu.sh[2659]: Succeeded to open shm,id:87,oriKey:6
|
131
|
Jun 16 11:37:54 driver start_cu.sh[2659]: xzb sctp_server_end_ms: 661 ms
|
132
|
Jun 16 11:37:54 driver start_cu.sh[2659]: xzb thread_name: OAM_AGENT, _thread_id: 2737, thr_id: 547555402160
|
133
|
Jun 16 11:37:54 driver start_cu.sh[2659]: ---------------------------------------------------------
|
134
|
Jun 16 11:37:54 driver start_cu.sh[2659]: STARTING GNB CONFIGURATION
|
135
|
Jun 16 11:37:54 driver start_cu.sh[2659]: ---------------------------------------------------------
|
136
|
Jun 16 11:37:54 driver start_cu.sh[2659]: Succeeded to open shm,id:88,oriKey:4
|
137
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [16/06/2025 11:37:54.022513][5][t: 548449034256][APP] file: app_cntrl.cpp, line: 512
|
138
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [16/06/2025 11:37:54.022969][TRC][t: 548449034256][APP] Version: YZS-NR-C-Rel_3.1.1_Pre1T1_4_2025-06-11T11:01:14 file: version.cpp, line: 21
|
139
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [16/06/2025 11:37:54.023270][TRC][t: 548449034256][APP] The process ID is %d file: version.cpp, line: 22
|
140
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [INF]: Scheduled changes not applied because of other existing connections.
|
141
|
Jun 16 11:37:54 driver start_cu.sh[2659]: SCTP F1AP Init: IP=192.168.62.241 PORT=38472
|
142
|
Jun 16 11:37:54 driver start_cu.sh[2659]: SCTP XNAP_CLIENT local: IP=192.168.62.241 PORT=38423
|
143
|
Jun 16 11:37:54 driver start_cu.sh[2659]: SCTP XNAP_CLIENT remote: IP=192.168.62.241 PORT=38422
|
144
|
Jun 16 11:37:54 driver start_cu.sh[2659]: SCTP XNAP_SERVER local: IP=192.168.62.241 PORT=38422
|
145
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [INF]: Connection 13 created.
|
146
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [INF]: Scheduled changes not applied because of other existing connections.
|
147
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [INF]: Session 696 (user "root", CID 13) created.
|
148
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [16/06/2025 11:37:54.090622][TRC][t: 548449034256][APP] set_thread_infos_2_data_pool dir:%u file: app_cntrl.cpp, line: 1114
|
149
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [16/06/2025 11:37:54.091030][TRC][t: 548449034256][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
150
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [16/06/2025 11:37:54.091325][TRC][t: 548449034256][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
151
|
Jun 16 11:37:54 driver start_cu.sh[2659]: success t_id:547601551792,tName:DL0
|
152
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [16/06/2025 11:37:54.091781][TRC][t: 548449034256][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
153
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [16/06/2025 11:37:54.092118][TRC][t: 548449034256][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
154
|
Jun 16 11:37:54 driver start_cu.sh[2659]: success t_id:547744260528,tName:SHM_RX_UL
|
155
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [16/06/2025 11:37:54.092547][TRC][t: 548449034256][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
156
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [16/06/2025 11:37:54.092722][TRC][t: 548449034256][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
157
|
Jun 16 11:37:54 driver start_cu.sh[2659]: success t_id:547751612848,tName:UDP_RX_DL
|
158
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [16/06/2025 11:37:54.093107][TRC][t: 548449034256][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
159
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [16/06/2025 11:37:54.093276][TRC][t: 548449034256][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
160
|
Jun 16 11:37:54 driver start_cu.sh[2659]: success t_id:547748458928,tName:UDP_RX_UL
|
161
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [16/06/2025 11:37:54.093608][TRC][t: 548449034256][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
162
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [16/06/2025 11:37:54.093782][TRC][t: 548449034256][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
163
|
Jun 16 11:37:54 driver start_cu.sh[2659]: success t_id:547749511600,tName:UDP_TX_UL
|
164
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [16/06/2025 11:37:54.094126][TRC][t: 548449034256][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
165
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [16/06/2025 11:37:54.094307][TRC][t: 548449034256][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
166
|
Jun 16 11:37:54 driver start_cu.sh[2659]: success t_id:547775738288,tName:UE_CNTRL0
|
167
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [16/06/2025 11:37:54.094634][TRC][t: 548449034256][APP] first:%s second:%u file: app_cntrl.cpp, line: 1142
|
168
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [16/06/2025 11:37:54.094812][TRC][t: 548449034256][APP] success t_id:%d file: app_cntrl.cpp, line: 1152
|
169
|
Jun 16 11:37:54 driver start_cu.sh[2659]: success t_id:547579527600,tName:UL0
|
170
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [16/06/2025 11:37:54.095217][TRC][t: 548449034256][APP] create_event_timer time:%u file: common_cntrl_thread.cpp, line: 682
|
171
|
Jun 16 11:37:54 driver start_cu.sh[2659]: create_event_timer,time:1000
|
172
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [INF]: Connection 14 created.
|
173
|
Jun 16 11:37:54 driver start_cu.sh[2659]: [INF]: Session 697 (user "root", CID 14) created.
|
174
|
Jun 16 11:37:54 driver start_cu.sh[2659]: ========== LISTENING FOR NOTIFICATIONS ==========
|
175
|
Jun 16 11:37:54 driver start_cu.sh[2659]: SCTP NGAP local: IP=192.168.62.241 PORT=38412
|
176
|
Jun 16 11:37:54 driver start_cu.sh[2659]: SCTP NGAP remote: IP=192.168.62.10 PORT=38412
|
177
|
Jun 16 11:37:54 driver start_cu.sh[2659]: xzb f1_end_ms: 865 ms
|
178
|
Jun 16 11:37:59 driver start_cu.sh[2659]: #############################################################################################################################
|
179
|
Jun 16 11:37:59 driver start_cu.sh[2659]: CU is UP: DU ID= 1
|
180
|
Jun 16 11:37:59 driver start_cu.sh[2659]: #############################################################################################################################
|