B5G_UE

#!/bin/sh

ptp_switch_script=/yzmm/startup_config.sh

external_script=/yzmm/gNB_config.sh

# A72 run in 1.8GHz

echo userspace > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor

echo 1800000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed

mkdir -p /boot

mkdir -p /yzmm

mkdir -p /coredump

mkdir -p /data

mount /dev/mmcblk0p1 /boot

mount /dev/mmcblk0p5 /yzmm

mount /dev/mmcblk0p6 /coredump

mount /dev/mmcblk0p7 /data

stty -F  /dev/ttyS2 115200

sleep 1

echo "close gps pp1s"

stty -F /dev/ttyS2  -echo

echo -en '$PSTMPPS,2,1,0*56\r\n' > /dev/ttyS2

#1588/gps config

if [ -f $ptp_switch_script ];then

	echo run $ptp_switch_script

	. $ptp_switch_script

else

	echo "config default ptp gps_pps_idtcm.bin "

	if [ -f "/lib/firmware/gps_pps_idtcm.bin" ] && [ -f "/lib/firmware/resources/ucp_trx_gpioCfg.json" ];then

	  echo "exist config file"

          if [ -f "/lib/firmware/idtcm.bin" ];then

            echo "exist idtcm.bin"

	  else

            cp  /lib/firmware/gps_pps_idtcm.bin  /lib/firmware/idtcm.bin

	  fi

	  insmod /usr/ko/ptp_idtcm.ko

        else

	  echo "no  exist config  file"

          echo  479 >  /sys/class/gpio/export

	  PD_PMUX1_REG=0x0445818C

          GPIO_SWPORTB_DR=0x0445000c

	  GPIO_SWPORTB_DIR=0x04450010

	  gpio0_portb_value_pre=`devmem $GPIO_SWPORTB_DR`

	  pd_mux1_value_pre=`devmem $PD_PMUX1_REG`

	  dir_value_pre=`devmem $GPIO_SWPORTB_DIR`

	  gpio0_portb_value=`printf "%#x" $(( $gpio0_portb_value_pre & 0xFDFFFFFF ))`

	  pd_mux1_value=`printf "%#x" $(( $pd_mux1_value_pre | 0x00000030 ))`

	  dir_value=`printf "%#x" $(( $dir_value_pre | 0x02000000 ))`

	  devmem $GPIO_SWPORTB_DIR 32 $dir_value

	  #reset 34002

          devmem $GPIO_SWPORTB_DR 32 $gpio0_portb_value

          #usleep 1000

          #set PD18 gpio mode

	  devmem $PD_PMUX1_REG 32 $pd_mux1_value

	  board_type=`cat  /sys/class/gpio/gpio479/value`

	  #restore 34002

	  gpio0_portb_value_pre=`devmem $GPIO_SWPORTB_DR`

	  gpio0_portb_value=`printf "%#x" $(( $gpio0_portb_value_pre | 0x02000000 ))`

	  devmem $GPIO_SWPORTB_DR 32 $gpio0_portb_value

          #usleep 1000

	  echo  479 >  /sys/class/gpio/unexport

	  if [ $board_type -eq 1 ];then

	    echo "BOARD:EVMYF"

            if [ -f "/lib/firmware/gps_pps_idtcm.bin" ] && [ -f "/lib/firmware/idtcm.bin" ] && [ -f "/lib/firmware/1588_pps_idtcm.bin" ] && [ -f "/lib/firmware/resources/ucp_trx_gpioCfg.json" ] ;then

	      echo "already cp evmyf file"

            else

	      #cp /lib/firmware/8A34002_CLK0_GPS_4XDPLL_GPIO0145_EVMF_FDD.bin /lib/firmware/gps_pps_idtcm.bin

	      #cp /lib/firmware/gps_pps_idtcm.bin  /lib/firmware/idtcm.bin

	      cp /lib/firmware/8A34002_CLK6_1X1588_3XDPLL_GPIO0145_EVMF.bin  /lib/firmware/1588_pps_idtcm.bin

	      cp /lib/firmware/resources/configure/ucp_trx_gpioCfg_evmyf.json /lib/firmware/resources/ucp_trx_gpioCfg.json

	    fi

          else

            echo "BOARD:EVMYT"

            if [ -f "/lib/firmware/gps_pps_idtcm.bin" ] && [ -f "/lib/firmware/idtcm.bin" ] && [ -f "/lib/firmware/1588_pps_idtcm.bin" ] && [ -f "/lib/firmware/resources/ucp_trx_gpioCfg.json" ] ;then

              echo "already cp evmyt file"

            else

              #cp /lib/firmware/8A34002_CLK0_GPS_4XDPLL_GPIO01_EVMT.bin   /lib/firmware/gps_pps_idtcm.bin

	      #cp /lib/firmware/gps_pps_idtcm.bin  /lib/firmware/idtcm.bin

	      cp /lib/firmware/8A34002_CLK6_1X1588_3XDPLL_GPIO01_EVMT.bin /lib/firmware/1588_pps_idtcm.bin

	      cp /lib/firmware/resources/configure/ucp_trx_gpioCfg_evmyt.json  /lib/firmware/resources/ucp_trx_gpioCfg.json

	    fi

          fi

	  insmod /usr/ko/ptp_idtcm.ko

	fi

fi

usleep 10000

hwtype=$(cat /lib/firmware/board.cfg  |grep "hwtype" |awk -F':' '{print $2}')

if [ ${hwtype} = '"EVMT2"' ]; then

    insmod /usr/ko/dwmac-dwc-qos-eth.ko

else

    insmod /usr/ko/dwmac-dwc-qos-eth-gnb.ko

fi

usleep 10000

insmod /usr/ko/loadelf.ko

usleep 10000

insmod /usr/ko/spin_driver.ko

usleep 10000

insmod /usr/ko/ucp4008cache.ko

usleep 10000

insmod /usr/ko/mem_dump.ko

usleep 10000

insmod /usr/ko/mem_export.ko

usleep 10000

insmod /usr/ko/ioreg.ko

usleep 10000

insmod /usr/ko/stc.ko

usleep 10000

insmod /usr/ko/tsc.ko

usleep 10000

chmod 600 /etc/ssh/ssh_host_rsa_key

if [ -f $external_script ];then

	echo run $external_script

	. $external_script

else

	echo "config eth0 default"

	ifconfig eth0 192.168.8.6 netmask 255.255.255.0

	ifconfig eth0 down

	ifconfig eth0 hw ether 44:00:88:ff:f8:85

#                result=$(eeprom_rw get mac)

#                if [[ $result =~ "error" ]]; then

#                    echo "eeprom read mac error"

#               else

#                   mac=$(echo $result | awk -F= '{print $2}')

#                   ifconfig eth0 hw ether $mac

#               fi

	ifconfig eth0 up

	route add default gw 192.168.8.1 dev eth0

fi

ifconfig lo 127.0.0.1 up

mount -t debugfs none /sys/kernel/debug

mkdir -p /var/lib/logrotate/

chmod 644 /etc/logrotate.conf

chmod 644 /etc/logrotate.d/ -R

systemctl start logrotate.service

mkdir -p /run/fcgiwrap

fcgiwrap -c 1 -s unix:/run/fcgiwrap/fcgiwrap.sock &

# create swapfile,when debian fs load swapfile

echo "===> will swapfile"

swap_file=/swapfile

ramrun=$(cat /proc/cmdline  |grep ram)

if [ -z "${ramrun}" ]; then

    if [ -f "${swap_file}" ]; then

        echo "found swapfile."

    else

        dd if=/dev/zero of=/swapfile bs=1G count=4

        chmod 600 /swapfile

        mkswap /swapfile

        swapon /swapfile

        echo "/swapfile none swap sw 0 0"  >> /etc/fstab

        echo "mk swapfile ok."

    fi

else

    # first run, ramdisk mode

    # autorun  fdisk, evmt.json, read boartype, macaddr

    cp /boot/fdisk_emmc_debian          /tmp

    cp /boot/rootfs_arm64.tar.gz        /tmp

    cd /tmp; chmod +x fdisk_emmc_debian; ./fdisk_emmc_debian;

    mount /dev/mmcblk0p3 /mnt

    tar xvf rootfs_arm64.tar.gz -C /mnt

    sync

    mount /dev/mmcblk0p1 /boot && touch /boot/ramdisk_ready_ok

    echo "will reboot....."

    reboot

fi

stty -F  /dev/ttyS2 115200

/opt/check_env.sh